Tests on Limestones & Uses of Lime

Tests on Limestones



The following practical tests are made on limestones to determine their suitability:
(i) Physical tests
(ii) Heat test
(iii) Chemical test
(iv) Ball test.


(i) Physical Test: Pure limestone is white in colour. Hydraulic limestones are bluish grey, brown
or are having dark colours. The hydraulic lime gives out earthy smell. They are having clayey taste. The presence of lumps give indication of quick lime and unburnt lime stones.

(ii) Heat Test: A piece of dry stone weighing W1 is heated in an open fire for few hours. If weight
of sample after cooling is W2, the loss of weight is W2 – W1. The loss of weight indicates the amount of carbon dioxide. From this the amount of calcium carbonate in limestone can be worked out.

(iii) Chemical Test: A teaspoon full of lime is placed in a test tube and dilute hydrochloric acid is
poured in it. The content is stirred and the test tube is kept in the stand for 24 hours. Vigourous
effervescence and less residue indicates pure limestone. If effervescence is less and residue is more it
indicates impure limestone.
If thick gel is formed and after test tube is held upside down it is possible to identify class of lime
as indicated below:
• Class A lime, if gel do not flow.
• Class B lime, if gel tends to flow down.
• Class C lime, if there is no gel formation.

(iv) Ball Test: This test is conducted to identify whether the lime belongs to class C or to class B.
By adding sufficient water about 40 mm size lime balls are made and they are left undisturbed for six
hours. Then the balls are placed in a basin of water. If within minutes slow expansion and slow
disintegration starts it indicates class C lime. If there is little or no expansion, but only cracks appear it belongs to class B lime.

Uses of Lime

The following are the uses of lime in civil works:
(i) For white washing.
(ii) For making mortar for masonry works and plastering.
(iii) To produce lime sand bricks.
(iv) For soil stabilization.
(v) As a refractory material for lining open hearth furnaces.
(vi) For making cement.

Share this

Related Posts

Previous
Next Post »