TESTS ON MORTAR
1. Crushing Test
2. Tensile Strength Test
3. Adhesive Test.
1. Crushing Test: This test is carried out on a brick work with the mortar. This brick work is
crushed in a compression testing machine and the load is noted down. Then the crushing strength is
obtained as load divided by cross-sectional area.
2. Tensile Strength Test: The mortar prepared is placed in a mould of bricket which has central cross-sectional area as 38 mm × 38 mm. After curing the briquette is pulled under the grips of tensile testing machine. The ultimate load noted. Then the tensile strength of mortar is load divided by the
central cross-sectional area.
3. Adhesive Test: Two bricks are joined together with mortar to be tested. The upper brick is
suspended from an overhead support. A board is hung from the lower brick. Then weights are added to the board till the bricks separate. The adhesive strength is the load divided by area of contact.